11
1.4 Safety Information and Precautions
1. The NAS can operate normally in the temperature of 0ºC–40ºC and relative humidity
of 0%–95%. Ensure the environment is well-ventilated.
2. The power cord and devices connected to the NAS must provide correct supply
voltage (100W, 90–264V).
3. Do not place the NAS in direct sunlight or near chemicals. Ensure the usage
environment's temperature and humidity is suited for using electronics.
4. Unplug the power cord and all connected cables before cleaning. Wipe the NAS with
a dry towel. Do not use chemicals or aerosols to clean the NAS.
5. Do not place any objects on the NAS during normal system operations and to avoid
overheating.
6. Use the flat head screws in the product package to lock the hard disk drives in the
NAS when installing the hard drives for proper operation.
7. Do not place the NAS near any liquid.
8. Do not place the NAS on any uneven surface to avoid falling off and damage.
9. Make sure the voltage is correct in your location when using the NAS. If unsure,
contact your distributor or the local power company.
10.Do not place any object on the power cord.
11.Never attempt to repair the NAS. Improper disassembly of the product may expose
you to electric shock or other risks. For repair-related enquiries, please contact
your distributor.
12.Rackmount NAS models should only be installed in server rooms and maintained by
authorized server managers or IT administrators. The server room should be
sufficiently locked and only certified staff allowed to enter.
W a rning:
There is the danger of explosion if a battery is incorrectly replaced.
Re pla c e only
with the s a m e or e quiv a le nt ty pe re c om m e nde d by the m a nufa c ture r.
Dispose of used batteries according to the manufacturer’s instructions.
To avoid serious injuries
do NO T touc h the fa n ins ide the s y s te m .
