background image

QTS Installation

The TS-x83XU uses the QNAP QTS operating system. You can install QTS using any of the following
methods.

Method

Description

Requirements

Qfinder Pro
installation
(Recommended)

If the NAS is connected to your local area
network, you can do the following:

• Locate the NAS using Qfinder Pro.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see 

Installing QTS Using

Qfinder Pro

.

• Computer

• Network cable

• Qfinder Pro installer

Cloud installation

If the NAS is connected to the internet,
you can do the following:

• Scan the QR code on the NAS.

• Log into your myQNAPcloud account.

• Use CloudLink to remotely access

your NAS.

• Complete the steps in the Smart

Installation Guide wizard.

For details, see 

Installing QTS Using the

Cloud Key

.

• Computer or mobile device

• Network cable

• myQNAPcloud account

• CloudKey

Installing QTS Using Qfinder Pro

Warning

Installing QTS deletes all data on the drives. Back up your data before proceeding.

1.

Power on the NAS.

2.

Connect the NAS to your local area network.

3.

Run Qfinder Pro on a computer that is connected to the same local area network. 

Note

To download Qfinder Pro, go to 

https://www.qnap.com/utilities

.

4.

Locate the NAS in the list and then double-click the name or IP address. 
The 

Smart Installation Guide

 opens in the default web browser.

5.

Click 

Start Smart Installation Guide

.

6.

Specify the following information. 

NAS name

: Specify a name with 1 to 14 characters. The name supports letters (A to Z, a to z),

numbers (0 to 9), and hyphens (-), but cannot end with a hyphen.

TS-x83XU User Guide

Installation and Configuration   

35

Summary of Contents for TS-1283XU-RP























































Reviews: