5.
Connect the power cord to the PSU and the electrical outlet.
6.
Power on the NAS.
7.
Enable alerts for PSU failures.
a.
Log on to QTS as administrator.
b.
Go to
Control Panel
>
System
>
Hardware
>
General
.
c.
Select
Enable Redundant Power Supply Mode
.
d.
Click
Apply
.
Expansion Unit Installation
The TS-x53DU is compatible with both SATA expansion units and USB expansion units. For details, please
see table below.
You can purchase storage expansion accessories from QNAP or an authorized reseller.
For details, go to
Expansion Unit Model
Description
Required Accessories
TR-004U
• Uses a USB 3.2 Gen 1 Type-C
interface
• Supports SATA drives
• USB 3.2 Gen 1 Type-A to
Type-C cable
• RAIL-B02
TL-R1200C-RP
• Uses a USB 3.2 Gen 2 Type-C
interface
• Supports SATA drives
• USB 3.2 Gen 2 Type-A to
Type-C cable
• RAIL-B02
TS-x53DU User Guide
Installation and Configuration
34