50
y
Standalone
The standalone option allows you to assign different IP settings for each network
port. The NAS can be accessed by different workgroups in two different subnets.
However, when this function is enabled, failover does not work. You can only enable
DHCP server for the primary network port (LAN 1).
Network Transfer Rate
You can select auto-negotiation (default), 1000 Mbps, or 100 Mbps. It is recommended
to use the default setting that the server will determine network speed automatically.
Obtain IP address settings automatically via DHCP
If your network supports DHCP, the NAS will use DHCP protocol to retrieve the IP
address and related information automatically.
Use static IP address
To use fixed IP address for network connection, enter fixed IP address, subnet mask, and
default gateway.
Primary DNS Server:
Enter the IP address of primary DNS server that provides DNS
Summary of Contents for TS-639 Pro Turbo NAS
