57
FTP clients do not support Unicode currently, it is recommended that you disable
Unicode support here and select the language the same as your OS in “System
Settings—Encoding Setting” page so that the folders and files on FTP can be
properly shown (please refer to Chapter 3.3.3). If your FTP client supports Unicode,
make sure you have enabled Unicode support for both your client and the NAS.
9
Enable Anonymous
You can enable anonymous login to allow users to access the FTP server of the NAS
anonymously. The users can access the folders and files which are opened for public
access. If this option is disabled, users must enter an authorized user name and
password to access the server.
9
Passive FTP Port Range
You can use the default port range (55536-56559) or define a port range larger
than 1024. When using this function, please make sure you have opened the
configured port range on your router or firewall.
9
Respond with external IP address for passive FTP connection request
When passive FTP connection is in use and the FTP server is configured under a
router, if the remote computer cannot connect to the FTP server via WAN, you can
enable this function. By enabling this function, the FTP service replies the manually
specified IP address or automatically detects the external IP address so that the
remote computer can connect to the FTP server successfully.
Summary of Contents for TS-639 Pro Turbo NAS
