115
3.8.3
Hardware Settings
You can enable or disable the hardware functions of the NAS.
i.
Enable configuration reset switch
By enabling this option, you can press the reset button for 3 seconds to reset the
administrator password and system settings to default.
ii.
Enable hard disk standby mode
When this function is enabled, hard disk will go to standby mode if there is no access
within the specified period. The Power LED will glow in blue and the Status LED will
be off in hard disk standby mode.
iii.
Enable light signal alert when the free size of SATA disk is less than the value
The Status LED flashes red and green when this function is enabled and the free
space of the SATA disk is less than the value. The range of the value is 1-51200 MB.
iv.
Enable alarm buzzer
Enable this option. The system will sound when an error occurs.
v.
Smart Fan configuration
After enabling Smart Fan, the fan rotation speed is automatically adjusted according
to the server temperature. It is recommended to enable this option. By manually
setting the fan rotation speed, the fan rotates at the defined speed continuously.
Summary of Contents for TS-639 Pro Turbo NAS
