200
13.2
Reset Administrator Password and Network
Settings
To reset the administrator password and network settings of the NAS, press the reset
button of the NAS for a few seconds. A beep sound will be heard. The following settings
are reset to default:
a.
System admin password: admin
b.
Network Settings/ TCP/IP Configuration: Obtain IP address settings automatically
via DHCP
c.
Network Settings/ TCP/IP Configuration: Disable Jumbo Frame
d.
Network Setting/ System Port Management: 8080 (system service port)
e.
System Tools/ IP Filter: Allow all connections
f.
LCD panel password: (blank)
After the reset, you can login the NAS with the default user name and password:
Default user name:
admin
Password:
admin
Note:
To reset the system by the reset button, the option “Enable configuration reset
switch” in Hardware Settings must be activated.
Summary of Contents for TS-639 Pro Turbo NAS
