background image

 

85 

contain the covered work, unless you entered into that arrangement, or that patent license 
was granted, prior to 28 March 2007. 
 
Nothing in this License shall be construed as excluding or limiting any implied license or 
other defenses to infringement that may otherwise be available to you under applicable 
patent law. 
 
12. No Surrender of Others' Freedom. 
If conditions are imposed on you (whether by court order, agreement or otherwise) that 
contradict the conditions of this License, they do not excuse you from the conditions of this 
License. If you cannot convey a covered work so as to satisfy simultaneously your 
obligations under this License and any other pertinent obligations, then as a consequence 
you may not convey it at all. For example, if you agree to terms that obligate you to collect 
a royalty for further conveying from those to whom you convey the Program, the only way 
you could satisfy both those terms and this License would be to refrain entirely from 
conveying the Program. 
 
13. Use with the GNU Affero General Public License. 
Notwithstanding any other provision of this License, you have permission to link or combine 
any covered work with a work licensed under version 3 of the GNU Affero General Public 
License into a single combined work, and to convey the resulting work. The terms of this 
License will continue to apply to the part which is the covered work, but the special 
requirements of the GNU Affero General Public License, section 13, concerning interaction 
through a network will apply to the combination as such. 
 
14. Revised Versions of this License. 
The Free Software Foundation may publish revised and/or new versions of the GNU General 
Public License from time to time. Such new versions will be similar in spirit to the present 
version, but may differ in detail to address new problems or concerns. 
 
Each version is given a distinguishing version number. If the Program specifies that a 
certain numbered version of the GNU General Public License “or any later version” applies 
to it, you have the option of following the terms and conditions either of that numbered 
version or of any later version published by the Free Software Foundation. If the Program 
does not specify a version number of the GNU General Public License, you may choose any 
version ever published by the Free Software Foundation. 
 
If the Program specifies that a proxy can decide which future versions of the GNU General 

Summary of Contents for Turbo NAS HS-210
























































































Reviews: