IMPORTANT!
o
Never use WD-40 as a lubricant on the tubular axle shafts as this compound will
ultimately leave the tubes drier and “stickier” than when they first started. If you want
to re-lubricate the sliding tubes, you can clean dry with a rag, and then apply a spray or
get “synthetic lubricant.”
o
Never power-wash your caddy. Spraying the caddy with any kind of water pressure
may cause water to enter the main housing of the caddy and short-circuit the electrical
components. To clean your QOD, simply wipe down with a wet cloth or golf towel.
ADJUSTING THE ALIGNMENT ON YOUR QOD
QODGOLFUSA.COM/ALIGNMENT
All of the caddies are aligned prior to being shipped, however with the many different
styles, sizes, and weights of golf bags on the market, your QOD may require an
alignment adjustment to ensure it is tracking straight. Also note, that the slope of the
terrain will impact the caddy’s ability to track straight, so naturally when you are on a
slope or uneven ground, the caddy will trend in the direction that the ground dictates.
The first step in diagnosing your alignment issues is to make sure that you have both sides of
your golf bag as equally weighted as possible. Meaning you do not want to keep a couple of
water bottles on one side of the bag, and only have a light jacket in the other. Try to disperse
the weight of the items in your bag evenly on both sides of your bag.
After doing this, check the alignment of your caddy again, if you are still having issues, please
continue below.
Summary of Contents for ELECTRIC GOLF CADDY 2018
Page 1: ...2018 QOD OPERATING MANUAL...
