CADDY SET-UP AND FOLDING
It will take time before these steps become second-nature to you, we recommend
following along with the videos at qodgolfusa.com/setup
Step 1: Stand next to the folded caddy with
the handle bar/control panel facing to your
left.
On the top of the right side of the
caddy, lift up on the small black plastic
lever, then lift the hand bar and extend it
out to your right until it is pointed in the
direction of 2 o’clock. Then close down the
same lever, locking it in place.
Step 2:
On your left, find the other small
black plastic lever and lift it upwards to
release it. Then lift the handle bar upwards
until the spine of the caddy is vertical and
pointed at 12 o’clock. Close down the same
lever, locking it in place.
Step 3: Find the rotating locking knob
located in the center of the vertical spine
and loosen it by rotating it to the left,
extend the spine upwards to its maximum
height and then rotate the knob back to the
right, which locks it into place. (The height
of the spine is not adjustable, it is designed
to lock in the same position each time.)
Summary of Contents for ELECTRIC GOLF CADDY 2018
Page 1: ...2018 QOD OPERATING MANUAL...
