SETTING UP YOUR PANEL
Let’s start by connecting your power.
Plug in the power connector
Route the wire behind the
retainer clip
Insert the wire into the strain-
relief
Now let’s put on your cover and attach the table stand.
Place the top of the cover onto
the panel’s back plate
Push the cover down until it
snaps in place
Insert the table stand into the
mounting holes and push upward
until it snaps into place
Plug in your panel, power it on
Plug in the power supply
provided with your panel
Push and hold the standby
button on the side of the panel
for 3 seconds
Once the panel powers up, the
home screen will appear.
