MAINTENANCE
1- Insert an SD card into your computer.
(
*We recommend a class 4 or higher SDHC card with 4gb – 16gb storage space
)
2- Download the current software from
(requires login)
3- Once the file is downloaded, right click the file and select "Unzip" or “Open”
4- Drag all files to your SD card.
Delete ANY other files, and safely remove the SD card
from your computer
5- Slide your SD card into the slot on the upper right side of the IQ Panel 2.
6- From the drop down menu Touch “Settings”
7- “Advanced Settings” and enter a valid Installer code
(default is 1111)
8- Touch “Upgrade Software”
9- Touch “Upgrade using SD Card”
10- The panel will search the SD Card for the patch and begin downloading it automatically.
11- Once complete touch "OK" to reboot the panel.
DO NOT TOUCH THE SCREEN.
The
process will take about 5 minutes and the LED may turn red, screen may turn off, etc.
After
the panel reboots the home screen will appear and the LED will turn green.
For the next 5
minutes the panel will update the backup partition.
Do not power down or use the panel
during this time
11- Eject the SD Card: (“Settings” then touch "SD Card” then “Unmount SD Card”
I
MPORTANT: Failure to perform these steps in the proper sequence may result in data corruption and/or panel
failure.
Swipe down
for access
SETTINGS
ADVANCED SETTINGS
ENTER CODE (1111, 2222)
SOFTWARE UPDATES VIA SD CARD
FIND IT
UPGRADE SOFTWARE
Summary of Contents for Panel 2+
