Qomo qit30, Quick Start Manual

English

QOMO HiteVision www.qomo.com 1-866-990-QOMO (7666)

Windows 2000/XP/ Vista Home Basic

      Under Windows 2000 / XP / Vista Home basic, you   

      must install driver (included in the Macro Key    

      Manager). Therefore, please install Macro Key  

      Manager before the device is plugged to your PC. Once  

      the Macro Key Manager is installed successfully, the    

      RF Wireless Tablet can work along with the macro key  

      and the hot keys.

Check the information displayed on the LCD indicator 

panel to confirm that the tablet is operating correctly.

Then begin to use the pen & enjoy!

5. Begin Using

       1. Plug receiver dongle to your PC

       2. Press and hold for at least 3 seconds to power  

           on the RF Wireless Tablet

       3. Press the binding button located at the rear of the  

           tablet while holding the binding button on the 

           receiver dongle at the same time. 

       4. The LCD connecting icon will blink and the blue  

            LED of receiver dongle will light up.

       5. Once the binding is successful, the number on the 

           LCD will display 001.

       6. Due to our pen’s power saving design, please always            

           hover the pen over the active area of the tablet to     

           awaken the pen prior to using the tablet.

       7. Check the information displayed on the LCD  

            indicator panel to confirm that the tablet is operating  

            correctly. 

You can begin to use the Wireless tablet, enjoy!