Sign-in-China.com
Online Wholesale for AD & Signage Products
Learn More >>
- 13 -
Assemble the front turntable (Refer to 1.3 section)
Pressure board
Lift and take off the pressure board. Insert screw in
the holes of pressure board to put on back.
Top and Bottom Roller
Top and bottom rollers are the key component of
the laminator and they directly affects the quality of
laminat ing and t itled image. Both top and bottom
is silicon roller for this machine. The advantage is
good heating and acid and alkali resistance, prevent
adhesion from cold laminat ing film. The bottom
roller is controlled by motor, the top roller rotated by
friction.
Notice: Don’t put your hand or finger between top and bottom roller, in case, press E-stop.
The Idler bar
The idler bar is used to smooth the film when go
through in ‘S’ direct ion, so the film is as flat as
possible between the rollers.
