background image

Press the buttons located up and down to the button panel to adjust to 

s for continuous volume increase/decrease. You 

Push the button located  in the middle to play or pause your music. To 

all, you can either accept a call as you normally do 

s the play/pause/answer call button. Your voice 

will be picked up by the microphone located on the top of the unit next 

. The person’s voice on the line will play through the 

OBA speakerphone. To end a call, use your phone’s controls or press 

lug the micro USB end of the included USB cable into the micro 

USB end into your computer,a USB AC adapter or car charger. 

ight on the back of the speaker will show red while charging, 

ing the OBA speaker in the car, pay attention to the traffic at 

Do not remove or attempt to remove the permanent internal battery.

lease keep in mind that the unit may be very dangerous in the 

event of a car collision if it is not strongly secured to a surface or 

Trouble Shooting:

Problem:

The sound is low or completely silent

Solution:

Make sure both your audio device and OBA speaker are charged.
Make  sure the connection (either AUX or  Bluetooth) is fully 
functional and secure. If using AUX , be sure the cable is securely 
inserted in the OBA and your audio device. Also make sure the audio 
cable is not damaged. Check that the volume on both your
audio device and OBA speaker are turned up to at least medium. 
Confirm that your audio device is playing music.

Problem:

Bluetooth will not connect or you cannot figure out how to connect it.

Solution:

Please consult the User Manual of your Bluetooth enabled audio 
device for instructions. Make sure that both your audio device and OBA 
speaker are discoverable and in search mode. Try rebooting the 
speaker by turning it off then back on.

Problem:

The person on the other end of my call cannot hear me or I cannot
hear him/her.

Solution:

Make sure your device is connected to the OBA properly. Turn up the 
volume on both your device and the OBA. Make sure nothing is 
obstructing the microphone hole.

4

Summary of Contents for 12048











Reviews: