CAI-QSP-01
:
QSeal Plug Customer Assembly Instructions
Page 5 of 9
STRIP CABLE
Strip cable jacket approximately 6” (152 mm) from end and place Crimp Support over fiber and Kevlar
so that it stops at the end of the jacket. Bend Kevlar back over the Crimp Support. Slide second Crimp
over Kevlar and Crimp Support and secure with tape for crimping after termination and polishing.
TERMINATE
Use the 2-Channel or 4-Channel Stripping Length Diagrams seen below (and located at the end of this
instruction) to Terminate and Polish the Fiber Optic Termini. Be sure to include a spring on each of the
fibers. For Termination and Polishing details, reference CAI-TERM-01.
2-Channel Stripping
Length Diagram
