Grid Assembly
“L” Bracket
Install the (2) Mast Clamps on the U-Bolts as shown
and fasten to the “L” Bracket using (4) lock washers
and (4) Nuts.
To mount antenna assembly in a tilted position,
attach (1) U-Bolt assembly to either the fixed tilt
positions or to the tilt slot (as shown) on the
“L” Bracket.
U-Bolts
Mast Clamps
“L” Bracket
Mast
Tilt Slot
Fixed Tilt Positions
OPTIONAL TILTED MOUNTING
Important Note: Feed Reflector must be orientated to
grid as shown for optimal antenna performance.
Feed Reflector
www.qpcom.com
User’s Manual
