18
Set WEP key
Click the
Set WEP Keys
will prompt you a
window to set
64bit
or
128bit
Encryption.
Select
HEX
if you are using hexadecimal
numbers (
0-9, or A-F
). Select
ASCII
if you are
using ASCII characters (
case-sensitive
).
Ten hexadecimal digits
or
five ASCII
characters
are needed if
64-bit WEP
is used;
26 hexadecimal digits
or
13 ASCII characters
are needed if
128-bit WEP
is used.
Encryption: WPA (TKIP)
WPA (TKIP):
If
WPA
is selected, users will have to select the Authentication modes
between
Enterprise
(RADIUS)
and
Personal
(
Pre-shared
Key)
.
Pre-shared Key
Pre-Shared-Key serves as a password. Users may key in a
8 to 63 characters string to set the password or leave it
blank, in which the 802.1x Authentication will be activated.
Make sure the same password is used on client's end.
There are two formats for choice to set the Pre-shared key,
i.e.
Passphrase
and
Hex
. If
Hex
is selected, users will have
to enter a 64 characters string. For easier configuration, the
Passphrase
(at least 8 characters) format is recommended.
