Authentication Type
:
Open System with 802.1x/WPA-RADIUS/WPA2-RADIUS
If the
Open System with 802.1x/WPA-RADIUS/WPA2-RADIUS
is selected, users will
have to select the Encryption from the pull-down list,
TKIP
,
AES
or
TKIP_AES
and
configure a RADIUS server, the RADIUS Server will proceed to check the 802.1x
Authentication. Only the
Open System with 802.1x
can set the encryption to
None
(Without any WEP Key protection mechanism)
Port
Enter the RADIUS Server’s port number provided by your ISP. The
default is
1812
IP Address
Enter the RADIUS Server’s IP Address provided by your ISP
Password
Enter the password that the AP shares with the RADIUS Server
Apply Change
Press to save the new settings on the screen.
Reset
Press to discard the data you have entered since last time
you press Apply Change.
Access Control
17
When
Enable Wireless Access Control
is checked, only those clients whose wireless
MAC addresses listed in the access control list can access this Access Point. If the list