QPIX CBS1400, User Manual

26

27

When the device is connected with a USB cable to a PC, Press the 

LEFT/RIGHT button for USB MSDC and press the ENTER button to 

confirm. The film scanner will become a mass storage device and to 

preview or edit images on PC.

You can also press MODE button to back to main menu.

8:  Maintenance 

Use the cleaning cloth to wipe down the scanning surface frequently, to 

prevent dust from appearing on the captured images. 

Use the provided cleaning brush to wipe away dust collected on the 

lens. Make sure that it is in PHOTO MODE.(refer to use instructions 

below)

1. Gently push the brush into the scanner. 

2. Flip the cover open and look through the 

transparent scanning surface.

3. Make sure that it is in PHOTO MODE.

4. Make sure that the brush is inserted fully 

into the scanner and covering the lens.

5. Rotate the brush such that the arrow is 

facing upwards

Note:

 if the brush cannot rotate, insert the 

brush further into the scanner, checking 

the position through the transparent 

scanning surface. (repeat steps 2-4)

6. Move the brush gently forward and 

backwards, sliding along the slot of the 

scanner. The brush will now be wiping the 

surface of the lens.

7. To remove, reverse the steps.