NOTE:
Location of the drive LED's may differ from that which is shown here.
Step 3.
The busy lamp will light and or change colors for a few seconds to indicate
that a disc or cartridge has been loaded and the drive has accepted the disc.
Step 4.
To eject and insert the disc or DVD-RAM cartridge, press the EJECT button.
NOTE:
Some software prohibits the use of the EJECT button, so a disc can not be
ejected in this way. Please refer to the instructions supplied with your software.
Step 5.
Once it has been ejected, remove the disc by hand and return it to its jewel case
or sleeve.
NOTE:
The disc cannot be ejected while the drive is reading or writing a DVD-R media
or DVD-RAM cartridge.
Note: Please refer to Que! DVDBurner Installation Manual CD for complete installation version.
10
H A N D L I N G