SOFTWARE VERS ION 3.44
9
Table 2. Stationary Controller Identification
1
POWER ON INDICATOR
Light indicates that power is on. Flashes intermittently
during normal operation.
17
STOP BUTTON
Used to stop playback, and recording.
2
MIDI IN INDICATOR
Light indicates that MIDI signal is being received Flashes
intermittently during normal operation.
18
PLAY BUTTON
Used to start playback, press again to start playback after pause
button has been pressed.
3
MIDI OUT INDICATOR
Light indicates that MIDI signal is being sent out. Flashes
intermittently during normal operation.
19
REC BUTTON
Use to initiate Quick™ Record.
4
CD INDICATOR
Light indicates that CD-ROM drive is selected media
source.
20
FLOPPY DISK DRIVE
3.5 inch HD/DD floppy drive.
5
LBRY INDICATOR
Light indicates that internal hard drive is selected media
source.
21
IN USE INDICATOR
Light indicates that the floppy drive is in use or busy.
6
FLPY INDICATOR
Light indicates that floppy drive is selected media
source..
22
DISK DOOR
Floppy drive door.
7
ON/OFF BUTTON
Used to turn on the stationary controller unit. Press again
to turn unit off. (The stationary controller does not power
on the Remote Control.)
23
FLOPPY DISK EJECTION BUTTON
Used to remove floppy from drive.
8
CD BUTTON
Used to select CD-ROM drive as playback source.
24
CD PLAYER
CD-ROM disc drive.
9
LBRY BUTTON
Used to select internal hard drive as playback source.
25
BUSY INDICATOR
Light indicates that CD-ROM is in use or busy.
10
FLPY BUTTON
Used to select floppy drive as playback source.
26
DISC TRAY
Used to hold CD to be played with the Serenade Pro Unit. (Note:
Printed side up)
11
ACCOMP. VOL. DOWN BUTTON
Used to decrease orchestration volume.
27
EMERGENCY EJECT HOLE
Used to open CD-ROM disc tray if tray is jammed shut.
12
ACCOMP. VOL. UP BUTTON
Used to increase orchestration volume.
28
OPEN/CLOSE BUTTON
Used to open and close the CD-ROM disc tray.
13
MASTER VOL. DOWN BUTTON
Used to decrease overall volume.
29
SWITCHED AC POWER OUTLET
Used to power external device to Serenade Pro Unit.
14
MASTER VOL. UP BUTTON
Used to increase overall volume.
30
AC POWER INPUT
Used to connect power supply to Serenade Pro Unit.
15
SCAN BACKWARD BUTTON
Use to scan backward for a song selection and move
backwards in certain other functions.
31
AUX INPUT LEFT AND RIGHT CHANNEL
Used to connect auxiliary device to the Serenade Pro Unit.
16
SCAN FORWARD BUTTON
Use to scan forward for a song selection and move
forward in certain other functions.
32
LINE OUTPUT LEFT AND RIGHT
Used to connect speakers to the Serenade Pro Unit.
