P e t i n e
V
69_1
P
AGE
22
Q R S M U S I C T E C H N O L O G I E S , I N C .
Play Petine from a MIDI File Player or Computer
To access the MIDI IN/OUT features connect the optional MIDI Adapter cable and add a jumper as shown on page 46.
“Optional MIDI Adapter Cable Connections for RECORD MIDI File Playe
r”
“Connecting for Standard Playback or Optional Record”
Play Petine from a MIDI File Player Or Computer.
Set Up Petine to Play from a MIDI File Player Or Computer.
Press STOP to halt play. Press the remote control’s SOURCE button and then the number
5
button. “
5ni
” displays.
Or
...
On the Petine controller, press the ADJ Dial twice within one-half second.
Rotate the ADJ Dial so that the dot is in the far right segment.
Press the ADJ Dial once so that the dot is flashing.
Rotate the ADJ Dial until “
Sni
” appears.
Press the ADJ Dial twice within one-half second to exit.
After a few seconds the display changes to “
---
” with a flashing dot at right.
Petine will now respond to MIDI data received into MIDI IN cable.
Press STOP on the remote or Press the ADJ Dial on Petine to halt playback.
Rotate the ADJ Dial to adjust the volume.
S n i
- - -
S n i
0 2 0
S n i
When an external device’s MIDI Out is connected to the MIDI IN cable of Petine, the MIDI Source can be set to either play the
piano or to trigger Petine’s internal soundcard instruments. An
optional
soundcard is required to hear the instruments but is not
required to hear the piano play. Petine comes from the factory set to trigger the soundcard instruments.
See the
“General MIDI Sounds List
” at the end of this manual.
MIDI Source “
ni
”
1]
Press STOP to halt play.
2]
Double-Click the ADJ dial.
3]
Press dial, the dot begins flashing.
4]
Rotate the dial clockwise.
5]
Stop at the “
J
”
6]
Press the dial, the dot is solid.
7]
Rotate the dial clockwise.
8]
Press dial, the dot begins flashing.
9]
Rotate dial to display “
FP
”.
Double-Click to Select and Exit.
-
- -
S
m i
S
m i
A
P
-
v
\
_
b
t
U
d
n
2
11
c
F
C
-
- -
J
r c
/
J
r c
J
r c
J
F P
J
r c
rc
FP
