For Technical Support Call 1-800-247-6557
Petine V
69_1
Q R S M U S I C T E C H N O L O G I E S , I N C .
P
AGE
39
Power ON Sequence
The Petine controllers will power on to the last played source. If the last played source
was the CD Drive, CompactFlash Reader or the Internal Source the total number of
songs currently on that media will be displayed. Press Play on the remote control or the
ADJ/SEL dial on the controller to begin playing the first song.
If the last played source
was either the CD or the CompactFlash and the drive or reader is empty,
then the system will go to the Internal Source and display the total number of
songs.
If the last played source was Auxiliary, Record or MIDI the Petine controller will
power on to that source ready for an external input signal or a command from user.
If Petine’s “power-on” display sequence is different than what is shown here,
see the “Restoring Petine’s Operating System” section of this manual.
P o n
P o n
P o n
P o n
C
Petine’s
Serial Number
1 5 1
Pianomation Processor’s EPROM Version Number
Petine’s
Application Version Number
“Operating System“
Total number of song on the media or name of other selected source.
Power On
Call QRS Technical Support
if
1
.5
1
does not display.
Locating the Serial and Application Versions
0 2 4
