![background image](http://html1.mh-extra.com/html/qsa-global/sentinel-sentry-330/sentinel-sentry-330_manual_3298146019.webp)
QSA Global, Inc.
40 North Avenue Burlington, MA 01803
888.272.2242
781.272.2000
qsa-global.com
Operations Manual
MAN-038 March 2019
Page 19 of 100
STEP 3 Continued
The protective cover will disengage from the
projector.
Secure the lock protective mechanism’s cover on
its bracket located above the locking mechanism.
Remove protective rubber cap from the remote control
connector.
Check the control cable and source assembly connectors
using the NO GO gauge according to the daily inspection
section.
IMPORTANT WARNINGS!
The control cable connector is made from
hardened steel and should never be left
unprotected or forced into connection with the
source assembly connector as this could
damage the connector over time, leading to
possible breakage during use.
3
4
5