![background image](http://html1.mh-extra.com/html/qsa-global/sentinel-sentry-330/sentinel-sentry-330_manual_3298146048.webp)
QSA Global, Inc.
40 North Avenue Burlington, MA 01803
888.272.2242
781.272.2000
qsa-global.com
Operations Manual
MAN-038 March 2019
Page 48 of 100
16 Begin the reassembly by inverting the selector ring retainer with the flange end facing down. Then
place the selector ring onto the selector ring retainer with the marking (“EXPOSE, LOCK and
CONNECT”) facing down.
17 Place the spring onto the sleeve and drop both into the center of the selector ring retainer. Orient
the “T” cutout in the selector ring retainer to be in line with the half moon feature of the selector
ring. This will set the lock slide position.
18 Use a screw driver or similar tool to depress the spring loaded sleeve while inserting the lock
slide into the “T” cutout. The lock slide red and green indicators should be facing down. The
raised tab of the lock slide should fit over the half moon feature in the selector ring.