25
When you remove the controller from the system chassis, the sensitive internal
components are exposed. Please avoid touching anything other than the memory
module when you add or remove a memory module.
2.
Insert a new memory module into the slot.
Push the retaining clips on the slot out to the sides.
Align the notch on the gold edge of the module with the notch in the memory slot. Push down
on the memory module with firm and even pressure. The retaining clips will snap into position
as the module is correctly inserted.
3.
Put back the controller you removed in step 1.
Align the controller with the chassis, then gently push the controller all the way to the back.
Push back and release lever then fasten the screws on the back of the XCubeNXT
