14 ©
Copyright 2020 QSAN Technology, Inc. All Right Reserved.
3.
Management and Monitoring
This chapter will instruct user how to manage and monitor the XCubeDAS system. Before
starting, at least one QSAN XCubeDAS system must connect to the CubeView.
3.1.
System Information
After clicking one of the devices in the CubeView left pane, main working area will show the
system information and major monitoring and managing tabs.
Figure 3-1
System Information
Options of System Information
The options available in this tab:
System Name:
Change the system name, highlight the old name and type in a new one,
and then click the
Change
button. Maximum length of the system name is 32 characters.
Valid characters are [ A~Z | a~z | 0~9 | -_ ].
Vendor Name:
The vendor name of the device.
Product Name:
The model name of the device.
FW Version:
The firmware version of the device.
Device WWN:
The WWN (World Wide Name) of the device.
System Buzzer:
Click the button to turn off the buzzer.
UID LED:
Click the button to turn on or off the UID (Unique Identifier) LED.
