background image

How to Contact QSC Audio Products

Mailing address:

                       QSC Audio Products, Inc.

                       1675 MacArthur Boulevard

                       Costa Mesa, CA 92626-1468 USA

Telephone Numbers:

Main Number 

(714) 754-6175

Sales & Marketing 

(714) 957-7100 or toll free (USA only) (800) 854-4079

Customer Service

(714) 957-7150 or toll free (USA only) (800) 772-2834

Facsimile Numbers:

Sales & Marketing FAX

(714) 754-6174

Customer Service FAX

(714) 754-6173

World Wide Web:

www.qscaudio.com

E-mail:

info@qscaudio.com

service@qscaudio.com

Warranty Information

Warranty Disclaimer (USA only; other countries, see your dealer or distributor) 

Disclaimer

QSC Audio Products, Inc. is not liable for any damage to loudspeakers, amplifiers, or any other equipment that is caused by 
negligence or improper installation and/or use of this cinema product. 

Product Warranty

QSC Audio Products, Inc. (“QSC”) guarantees its products to be free from defective material and / or workmanship for a 
period of three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this 
warranty when the defect occurs under normal installation and use - provided the unit is returned to our factory or one of our 
authorized service stations via pre-paid transportation with a copy of proof of purchase (i.e., sales receipt). This warranty 
provides that the examination of the return product must indicate, in our judgment, a manufacturing defect. This warranty 
does not extend to any product which has been subjected to misuse, neglect, accident, improper installation, or where the 
date code has been removed or defaced. QSC shall not be liable for incidental and/or consequential damages. This warranty 
gives you specific legal rights, and you may also have other rights which vary from state to state. This limited warranty is 
freely transferable during the term of the warranty period. 

Customer may have additional rights, which vary from state to state.

In the event that this product was manufactured for export and sale outside of the United States or its territories, then this 
limited warranty shall not apply. Removal of the serial number on this product, or purchase of this product from an unautho-
rized dealer, will void this limited warranty. 

Periodically, this warranty is updated. To obtain the most recent version of QSC's warranty statement, please visit 
www.qscaudio.com.

Contact us at 800-854-4079 or visit our website at www.qscaudio.com.

QSC Audio Products, Inc.  1675 MacArthur Boulevard  Costa Mesa, California  92626   USA

©2007  “QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office.

Summary of Contents for DCM 10

























Reviews: