6
TD-000517-01-A
Rear Panel Features
DCM 100
— Figure 2 —
1
2
3
4
5
(8 connectors)
6
7
8
123456789
SERIAL: 123456789
MODEL: DCM 100
DCM 300
— Figure 3 —
1
2
3
4
5
(11 connectors)
6
7
8
123456789
SERIAL: 123456789
MODEL: DCM 300
1.
NETWORK
(RJ45) – 10/100 Mbps Ethernet port for
DPM Manager, 3rd-party, or SNMP management and remote
access.
2.
RS 232
– Serial communications port (RS232) – 3rd party
control/automation
3.
ANALOG INPUTS
, audio
(DB-25) – connect to D-Cinema server or
film processor with analog outputs
4.
MODEL
and
SERIAL
number
5.
DataPort
interface for QSC amplifiers – DCM 100 supports up to
8 single-port amplifiers, DCM 300 supports up to 11 single-port
amplifiers.
6.
HI MON
– Hearing Impaired and monitor outputs
7.
POWER ON / OFF
switch
8.
IEC
inlet – AC mains power connector with cord lock
DPM Manager
DPM Manager is used to configure and manage your DCM and to configure the network settings if required.
Your computer must meet the following minimum requirements:
1. Computer with Windows® 7, 8, or 10 OS (32 or 64 bit) or MAC OS 10.9.5 or higher
2. 4 GB of RAM or greater
3. Display resolution of at least 1024 x 768
