15
16
Unpacking
There are no special unpacking precautions. However, it is recommended that you keep the original packing materials for reuse in the rare event
that service is required. If service is required and the original packing material is not available, ensure that the unit is adequately protected for
shipment (use a strong box of appropriate size, sufficient packing/padding material to prevent load shifting or impact damage) or call QSC’s Technical
Services Group for replacement packing material and a carton.
DCP Product Carton Contents
1. DCP product
2. Hardware User Manual
3. DCP software CD(s)
4. IEC power cord and wire cord retainer
5. Euro style connector plug kit
6. SD card (2 GB)
7. Warranty card
Mounting
The DCP product is designed to be mounted in a standard 19" (480 mm) equipment rack and requires 3 vertical rack spaces (refer to IEC 60297
for additional rack dimensions and design details). Rack mounting provides the DCP with stability and a convenient means for dressing the cables
connecting to the product. Some rack systems also provide climate control and/or conditioned power.
Rack mount the DCP product by supporting it from underneath while aligning the four front panel mounting holes (in the rack ears) with the threaded
screw holes in the rack rails. Install all four mounting screws and washers and tighten securely. The DCP product comes with rear rack support ears.
Ensure that these rear mounting points are securely fastened to rear rack rails or rack side walls.
Computer Requirements
Your PC or laptop must meet the following minimum requirements:
In addition to these minimum requirements, your PC or laptop must have a 10/100 or 10/100/1000 Mbps Network Adapter (NIC) in order to join a
QSControl
™
network.
Software Installation
Installing the DCP Manager
™
and QSControl.net
™
suite of software applications is easy. All you need to do is choose the folder where the application
is to reside (the default setting is acceptable for most users).
1. IBM PC compatible computer (Windows PC)
2. Intel Pentium 4 CPU or better
3. CPU speed of 2.0 GHz or faster
4. 1 GB of RAM or greater
5. Hard drive with at least 1 GB of space available
6. Display resolution of at least 1024 x 768
7. CD-ROM drive for installing DCP 300 software
8. Windows
®
XP Pro, Windows Vista
®
, Windows
®
7 operating System (Supports 32 or 64 bit systems)
1. Start your Windows
®
PC or laptop
2. Close any running applications
3. Place the DCP Manager software CD into your CD-ROM drive.
4. The DCP Manager software should auto-run. If not, select run from the start menu. Browse to the file named setup.exe on your CD-ROM drive.
5. Click the Install DCP Manager button
