3
Required Connections
• LAN‑A — Connect one end of a Cat 5e cable with an RJ45 connector to the LAN‑A connector on the Page Station. Connect the other end of the
cable to the Q‑LAN network.
When power is supplied to the Page Station it may take several minutes to boot fully. The message "Q‑Sys not configured" displays. This message
remains until the network details are configured for the Page Station and it is included in a valid paging design.
About PoE and AUX POWER
There is no On/Off switch for the Page Station, making the order in which the power is connected important. The following information describes the
events when power is lost based on which power is supplied to the Page Station first.
• If AUX POWER is supplied first:
• The Page Station boots using AUX POWER.
• If PoE is then connected, it is not used.
• If AUX POWER fails, power to the Page Station is lost, the Page Station re‑boots using PoE.
• If PoE fails with AUX POWER still available, there is no effect ‑ PoE was not being used.
• If PoE is supplied first:
• The Page Station boots using PoE.
• If AUX POWER is then connected, it is not used.
• If PoE fails, the Page Station switches to AUX POWER. There is no re‑boot.
• If AUX POWER fails with PoE still available, there is no effect AUX POWER was not being used.
• If PoE returns, the Page Station remains on AUX POWER.
RoHS STATEMENT
The Q‑Sys Page Stations products are in compliance with European Directive 2002/95/EC – Restriction of Hazardous Substances (RoHS).
The Q‑Sys Page Stations products are in compliance with “China RoHS” directives. The following chart is provided for product use in China and
its territories:
Q‑Sys Page Stations
部件名称
(Part Name)
有毒有害物质或元素
(Toxic or hazardous Substances and Elements)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(vi))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
电路板组件
(PCB Assemblies)
X
O
O
O
O
O
机壳装配件
(Chassis Assemblies)
X
O
O
O
O
O
O:
表明这些有毒或有害物质在部件使用的同类材料中的含量是在
SJ/T11363_2006
极限的要求之下。
(O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363_2006.)
X:
表明这些有毒或有害物质在部件使用的同类材料中至少有一种含量是在
SJ/T11363_2006
极限的要求之上。
(X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/
T11363_2006.)
