11
QIO-ML2x2 Front Panel
1 2
3
1.
Power LED
– Illuminates blue when the Q-SYS QIO-ML2x2 is powered on.
2.
ID LED
– LED blinks green when placed into ID Mode via ID Button or Q-SYS Configurator.
3.
ID Button
– Locates the QIO-ML2x2 in Q-SYS Designer Software and Q-SYS Configurator.
QIO-ML2x2 Rear Panel
4
2
1
3
5
6
7
1.
External Power Input 24V DC 2.5 A
– Auxiliary power, 24 VDC, 2.5 A, 2-pin Euro connector.
2.
Daisy-Chain Power Output 24V DC 2.5 A
- Auxiliary power, 24 VDC, 2.5 A 2-pin Euro connector.
3.
LAN [PoE]
– RJ-45 connector, 802.3af PoE Type 1 Class 3 power, Q-LAN.
4.
LAN [THRU]
– RJ-45 connector, Ethernet daisy-chaining.
5.
Device Reset
– Use a paperclip or similar tool to restore default network settings and recover factory default settings. Before
attempting a reset, refer to the Q-SYS Help for details.
6.
Line Outputs
– Two channels, balanced or unbalanced – green.
7.
Mic/Line Inputs
– Two channels, balanced or unbalanced, phantom power – orange.
