12
H
05/2016
english
9 Disposal / Recycling
10 Technical data
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one speci
fi
ed could result in less sheet capacity and increased noise during oper-
ation. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
Cutting type
Strip cut
Cross cut
Cut size
(mm)
3.9
4 x 25
Security level
DIN 66399
P-2, T-2, E-2
P-4, T-4, E-3, F-1
Cutting capacity*
(sheets), A4
70 g/m
2
80
g/m
2
12 - 14
10 - 12
6 - 7
5 - 6
Weight
4.0 kg
4.5 kg
Power consumption
with max. number of sheets
300 W
120 W
Sound pressure level emissions
(Idle running / load)
58-60 dB(A) / 63-64 dB(A)
52-53 dB(A) / 60-63 dB(A)
Intake width
225 mm
Cutting speed
44 mm/s
Power supply
215 - 240 V, 50 - 60 Hz
Operating mode
Brief operation
Operating time
3 min
Idle time
30 min
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
Size
W x D x H (mm)
366 x 258 x 455
Shredded material container volume
20 l
Electrical and electronic old
devices contain a variety of valu-
able materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
EU declaration of conformity
Product:
Document shredder
Machine type:
H
The manufacturer,
HSM GmbH + Co. KG
, Austraße 1 - 9, 88699 Frickingen / Germany, hereby declares under its sole responsibility
that the products described above comply with the applicable harmonisation legislation of the European Union:
Low Voltage directive 2014/35/EU, EMC directive 2014/30/EU, RoHS directive 2011/65/EU
Related standards:
▪
EN 55014-1:2006 +A1:2009 +A2:2011
▪
EN 55014-2:1997 +A1:2001 +A2:2008
▪
EN 61000-3-2:2006 +A1:2009 +A2:2009
▪
EN 61000-3-3:2013
▪
EN 62233:2008
▪
EN 60950-1:2006 +A11:2009 +A1:2010 +A12:2011 +AC:2011 +A2:2013
Signed for and on behalf of: HSM GmbH + Co. KG
Frickingen, 21.4.2016
ppa. Hubert Kötzinger - Chief Technical Of
fi
cer (CTO)
