background image

New Generation GPS                  MTK  Bluetooth  GPS                 

BT-Q815 Quick Guide             

 

 

               

Qstarz International Co., Ltd.

 

 

6F-2, No. 160, Ming Chuan E. Rd., Sec. 6, Taipei, Taiwan, R.O.C

 

Tel: +886 2 2792 0061    Fax: +886 2 2792 0062     E-Mail: info@Qstarz.com    Web: www.Qstarz.com

 

2

D. Start to use 

D-1    Fully charge the battery when using at the first time 

A fully charged battery can last for 30 hours continuously operation with solar battery. 

NOTE: In firstly Use of this Mini Solar Bluetooth GPS Receiver, we strongly recommend you to bring Bluetooth GPS Receiver 
outdoor or open sky at least 5~15 minutes for sure 3D position fixed and almanac updated.

 

 

D-2    Activate the Bluetooth function in your PDA/Smart phone or PC 

Before activating the Bluetooth function in your PDA/PC, please press power button 1~2 seconds to power on BT-Q815 Receiver for paring 
and check if your device is equipped with Bluetooth function. If not, you may need to acquire an optional CF/SD Bluetooth card or Bluetooth 
dongle. 

NOTE: The pairing procedure is required to execute in the first time only. And the pass code is “

0000

” if required. 

 

D-3    Automatically create a shortcut in Bluetooth Manager window

 

After the pairing complete, the system will then find a quick connect device “BT GPS” in Bluetooth Manager. In further use, you just need to 
click it to connect to this Bluetooth GPS Receiver. 
 

D-4    Check the Serial Port in Bluetooth Setting 

After complete pairing with the Receiver, please click “Serial Port” to confirm the assigned COM port. If you use PDA/PC to pair the GPS 
Receiver, please check “Outbound COM port”.

 

 

D-5    Set correct Serial Port in your map software 

Activate your navigation software and make sure to select the correct “Serial Port”.   

NOTE: In the map software such as TomTom, you might need to change preference and set “Other Bluetooth GPS” or “Other 
Cable NMEA GPS” according to PDA/phone model. In some case please consult map software company to vary the setting if you 
have issue on positioning. 

 

D-6  Turn off GPS unit 

Press BT-Q815 power button 1~2 seconds to power off the device. 

 
 

E. OTHERS 

E-1  LED Indicators 

 LED 

Status 

Flash 

ON 

OFF 

Power (Green/Red) 

Low Power (Green flashing) 
Recharging (Green flashing) 

Sufficient Power (Green) 
Activated (Red) 

 

Bluetooth (Blue) 

Flashing 3 times/sec (in pairing mode),   
Flashing for every 1 second (Bluetooth connected)

 

GPS not powered 

GPS (Red) 

GPS position is fixed, Navigation (Flashing for 
every 3 second) 

Detecting Satellite, GPS 
position not fix 

GPS not powered 

 
E-2  Manufacturing Setting 

Protocol: NMEA 0183, ASCII (Default

GGA, GSA, GSV, RMC, VTG) 

Baud Rate: 9600,N,8,1(Default); Datum: WGS-84 

 
E-3  GPS Features 

MTK GPS Receiver with super high sensitivity at -158dBm 
Frequency: L1, 1575.42 MHz; C/A Code: 1.023 MHz chip rate 
Acquisition time: Hot start 2 sec. / Warm start 36 sec / Cold start 37 sec. (averaged) 

 
E-4  Bluetooth Features

 

Bluetooth Version: V1.2 / SPP profile 
Class 2 with 10 meters in open space 

 
E-5  Overall Features

 

Ultra Low power consumption, built-in rechargeable 900mAh Lithium battery (up to 30 hrs after fully charged) 
Size: 52.0 (W) X 82.0 (L) X 21.0 (H) mm / Weight < 70g (battery excluded) 
 
 

F. Trouble Shooting

 

Problems

 

Reasons

 

Methods

 

No position output but timer is 
counting 

Weak or no GPS signal can be received at the 
place of 

BT-Q815

 

Find an open space for your 

BT-Q815

 

Execute fail 

Bluetooth function unstable 

Re-Start PDA or PC or re-install software 

Can not turn on the 
COM port 

Install 

BT-Q815

 incompletely or the COM port of 

the device is being used 

Install 

BT-Q815

 completely or stop other 

device that is being used. 

Can not find out 

BT-Q815

 

Poor connection 

Re-Start PDA or PC and re-install software. 

No Signal 
 
 

No action for few minutes may cause the Pocket 
PC enter power saving mode. It may close the 
COM port at the same time. 

Close the application and execute it again to 
re-open the COM port. 
 

No Signal 
 

Weak or no GPS signal when using

 BT-Q815

 

indoor 

Go outdoors to improve the poor GPS signal. 

Can not be recharged by solar 
panel 

BT-Q815

 can be charged under enough sunshine. Please 

replace 

BT-Q815

 under the open sky 

or with enough sunshine. 

 

Reviews: