Configuration manual
5. File System Management
70
www.qtech.ru
The system has started normally.
Configure Startup Parameters
In configuring startup parameters, you can configure the application program file that is to be
used in next startup.
Table 5-10 Configuring startup parameters
Step
Command
Description
Enter the file system
configuration mode.
filesystem
-
Configure
startup
parameters.
boot-loader
path/filename [ bootline-
number ]
Mandatory
5.2.7
File System Managing, Monitoring, and Maintaining
Table 5-11 File system managing, monitoring, and maintaining
Command
Description
clear boot-loader [ bootline-number ]
Clears the startup parameters with the
specified index.
show filesystem
Display the information about the file
system.
show file { location | descriptor }
Display the location of the system file in
the file system and the descriptor.
show boot-loader
Display the system startup parameters.
5.3
Typical Configuration Example of File System Management
5.3.1
Configure Startup Parameters
Network Requirements
A PC is used as the local terminal to log in to the device in the Telnet mod
The route between the PC and the device must be reachable.
Network Topology
