The information of the interface includes: numbers of unicast, multicast and
broadcast message etc.
Using clear interface command in global mode, if the interface-num and slot-num
are not assigned, the information of all interfaces is cleared. If the slot-num is
assigned, the port information of the assigned slot is cleared. In interface mode,
only the information of the current port can be cleared.
【
Example
】
!Clear information of all interfaces
QTECH(config)#clear interface
!Clear information of interface 5 in global and interface mode
QTECH(config)#clear interface ethernet 0/0/5
QTECH(config-if-ethernet-0/0/5)#clear interface
2.1.2
description
Use description command to configure a port description string. Use no
description command to remove the port description string.
2-3
Summary of Contents for QSW-2900
