Page
18
AN-X3-GENI
January 2024
Web Page IP Configuration
Select
Administration/AN-X Configuration
.
The
AN-X Configuration
page appears.
The serial number and MAC address of the AN-X being configured are shown.
Check either DHCP or Static. If Static, fill in the required fields.
DHCP
If the AN-X3 finds a DHCP server on the network, it obtains an IP address and other network
parameters (netmask and default gateway) from the DHCP server.
To find the address assigned, you have to look at the DHCP server log.
When you submit the changes, if the AN-X3 does not find a DHCP server, it reverts to the
default link local address 169.254.42.84 and repeatedly flashes the SYS (or MS) LED 3 times red
followed by a pause.
Static IP Address
If you select static IP address, enter:
•
the IP address for the AN-X.
•
the netmask for the AN-X
•
the default gateway for your network.
You must enter a valid default gateway address even if there is no device at the gateway address
on the network.
