Page
40
AN-X3-GENI
January 2024
Quick Start
Use the following steps to run the AN-X3-GENI in ghost mode.
1.
Use the web interface to set the baud rate and serial bus address
2.
Connect AN-X3-GENI to the Genius network.
3.
Use the web interface to perform an autoconfiguation and automatically generate a
ControlLogix configuration.
4.
Save and edit the Genius configuration file. Remove Scan from all network devices.
5.
Save and download the modified Genius configuration file to the AN-X3-GENI.
6.
Save and edit the ControlLogix confguration file the AN-X3-GENI created when you
performed the autoconfiguration. Comment out all the DataOutput sections.
Uncomment the ghost mode entries it created and modify them to suit your
application.
7.
Save and download the modified ControlLogix configuration file.
8.
Use the web interface to view the active configuration and locate the data.
9.
Use the web interface to export the aliases for the ControlLogix configuration and
import them into RSLogix 5000.
Use the aliases to access the data from RSLogix 5000
