AN-X3-GENI Page
45
Using the Web Interface
The AN-X module contains a webserver capable of communicating with standard web browsers
such as Chrome or Firefox.
Use the web interface to:
set the baud rate and serial bus address for the AN-X3-GENI
set the Genius bus I/O network configuration
set the Ethernet/IP scheduled data configuration
view the current configuration
view AN-X logs
view and clear faults from Genius blocks
It also contains contact information for support.
To use the web interface, you must know the IP address of the AN-X. To access the web
interface, start your web browser and type the AN-X IP address where you normally enter web
addresses in the browser.
The left pane contains commands. Click on the arrows at the left of the main headings to expand
or contract the sections.
