User Manual –LS01 Laser
152.738UK
4
User Manual –LS01 Laser
152.738UK
13
13. DMX-512 connection :
The fixture is equipped with 3-pin XLR connectors for DMX input and output.
The SE connectors are wired in parallel. Only use a shielded twisted-pair cable
designed for 3-pin XLR-plugs and connectors in order to connect the
controller with the fixture or one fixture with another.
Building a serial DMX-chain:
Caution:
At the last fixture, the DMX-cable has to end with a terminator.
Solder a 120 Ohm resistor between PIN 2 (-) and PIN 3 (+) into a 3-pin
XLR-plug and plug it in the DMX-output of the last fixture.