User Manual – QTFX-V1
160.456UK
12
16. How to mount to trussing:
1)
Remove the bottle from the machine.
2)
Turn the machine upside down and remove the 4 highlighted screws to
release the bottle panel.
User Manual – QTFX-V1
160.456UK
5
5. Mounting instruction :
The fixture may be mounted in any position provided there is adequate
room for ventilation and the fluid can not leak.
It is important never to obstruct the front of the machine, fan or vents
pathway. Mount the fixture using a clamp.
Adjust angle of the fixture loosening both knobs and tilting the fixture.
After finding desired position, re-tighten both knobs.
When selecting installation location, take into consideration refilling the
tank and routine maintenance. Safety cables must always be used.
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperatures changes or restricted ventilation. Also do
not mount so vertically over people as occasionally condensation builds up
and the fluid can be quite hot.
6. Caution! To prevent Mortal Electrical Risk and Long Life Operation :
For your safety, please kindly pay attention to all of the warnings listed
below:
Always plug in the power plug last and disconnect from the mains
when the device is not in use or before cleaning.
Do not install and operate the device in rain or extreme heat,
moisture or dusty environments.
This device is for indoor use only and in a dry environment.
Do not switch on immediately but wait until it reaches to room
temperature if the device has been exposed to drastic temperature
fluctuations.
Do not shake the device and avoid brute force when installing or
operating.
