background image

2/19

1.BERORE YOU BEGIN

Unpacking Instructions

What is included

     Immediately upon receiving a fixture, carefully unpack the carton, check  the contents to ensure

that all parts are present, and have been received in good condition. notify the shipper immediately

and retain  packing material for inspection if and parts appear damaged from shipping or the carton

itself shows signs of mishandling. Save the carton and all packing materials. ln the event that a

fixture must be returned to the factory, it is important that the fixture be returned in the original

factory box and packing.

Safety instructions

     Please read these instructions carefully, which includes important  information

               about  the installation, usage and maintenance of your fixture.

     Please keep this User Guide for future consultation. lf you sell the unit to another user, be sure

     that they also receive this instruction booklet.

     Always make sure that you are connecting to the proper voltage and that the line voltage you

    are connecting to is not higher than that stated on decal or rear panel of the fixture.

     This product is intended for indoor use only! To prevent risk of fire or shock, do not expose

      fixture to rain or moisture. Make sure there are no flammable materials close to the unit while 

      operating.

     In the event of serious operating problem, stop using the unit immediately. Never try to repair

    the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.

    Please contact the nearest authorized technical assistance center. Always use the same type 

    spare  parts.

     Dont connect the device to a dimmer pack.

     Make sure power cord is never crimped or damaged.

     Never disconnect power cord by pulling or tugging on the cord.

     Do not operate this device in more than 104F(40

)ambient temperatre conditions.

Caution!

                       There are no user serviceable parts inside the unit. Do not open the housing

or attempt any repairs yourself. In the unlikely event your unit may require service. Please 

 contact us!

 

USER MANUAL 

 1)  

 2)  DC 9-12V 1000mA output, 100V~240V, 50/60Hz input auto-ranging Power Supply

 3)  Manual 

 4)  LED gooseneck lamp

Dimmer console

 1)  Dimmer console

 2)  DC 9-12V 1000mA output, 100V~240V, 50/60Hz input auto-ranging Power Supply

 3)  Manual 

 4)  LED gooseneck lamp

!

                       DM X 5 1 2 CON T ROLLER SERI ES

Summary of Contents for DM-X24





















Reviews: