151.606UK User Manual
Introduction
Thank you for choosing the GOBO STARWASH as part of your light show. This compact light effect unit
is a complete lighting effects solution in a single fixture with LED Moonflower, Colour Wash and Laser
functions, all controllable from internal programs or remote control. Please read and keep the following
instructions for future reference.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to moisture.
If liquids are spilled on the housing, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use. Avoid impact, pressure or heavy vibration to the case. No user
serviceable parts inside
–
Do not open the case
–
refer all servicing to qualified service personnel.
Safety
Check for correct mains voltage and condition of IEC lead before connecting to a power outlet.
Do not allow any foreign objects to enter the case or connectors.
Placement
•
Keep away from damp or dusty environments
•
Use the included tripod stand for installation onto a stable surface
•
Ensure adequate air-flow around the fixture housings
•
Ensure adequate access to controls and connections
Caution: Laser radiation
Avoid pointing directly towards eyes. Laser output can cause injury if viewed directly.
This product is a Class 3B laser and should only be installed and used by personal who are
trained in the management of laser radiation and are able to operate in accordance within
the guidance given by the Health and Safety Executive (HSE) in HS(G)95: “The Radiation
Safety of Lasers used for Display p
urposes”.
Copies of this guide can be downloaded from
www.avsl.com/assets/documents/hsg95.pdf
Cleaning
•
Use a soft cloth with a neutral detergent to clean the casing as required
•
Use a vacuum cleaner to clear ventilation grilles of any dust or debris build-ups
•
Do not use strong solvents for cleaning the unit
