151.606UK User Manual
In the box
Please open the package carefully and check that all contents are present and in good
condition.
Contact your retailer if any part is missing or broken.
•
GOBO STARWASH light effect unit
•
Mounting bracket
•
IR remote control
•
IEC mains lead(s)
•
Laser switch key
Rear panel
Operation
Using the Mode and Sound/Auto buttons, the GOBO STARWASH can be set to various
modes.
Press the MODE button (2) to step through the internal programs.
Gobo projector, Colour wash, Laser show or all 3 together.
Press the Sound / Auto button (3) to toggle between sound-activated or auto control of the
selected mode.
For safety, the laser effect is activated by a key switch (5) and a remote 2-pin connector (7)
The key switch must be set to on and the supplied 2-pin plug connected for the laser effect
to operate.
The 2-pin plug has both pins shorted and can be wired as a remote laser defeat switch if
needed.
1 Cooling vent
2 Mode button (selects program)
3 Sound / Auto button
4 Internal microphone
5 Laser safety key switch
6 Mains power inlet & fuse holder
7 Remote laser safety switch connector
