background image

 

PAL12 PAL15 User Manual 

Setting up 

 

When powered up, BASS and TREBLE controls (19, 20) should remain pointing vertically  
(i.e. 12-o-clock position). Turn up the MASTER VOLUME control (18) part way. 

 
You may decide to activate the LED light show on your PAL SERIES unit by moving the LED 

power switch (10

) to the “on” position. These LEDs will 

sequentially switch colours, which 

increases in speed when there is sound coming from the speaker. 

 
Your PAL SERIES unit should now be ready to operate. 

 

VHF Wireless Microphones  

 

Extend the VHF antennas (4) at the rear of the unit. Insert 2 x AA batteries into each handheld 

microphone by carefully uns

crewing the base and connecting the “+” and “

-

 terminals of the 

batteries to the corresponding contacts inside the mic body, taking care to observe the correct 
polarity and screw the base back onto the handset. Turn each VHF mic volume control (5, 6) 

up part way for checking.  
 

Switch on each wireless microphone and gradually increase the respective VHF mic volume 
control, testing the microphone for output through the speaker. Note that the microphone 

switch has 2 positions - the centre position is muted a

nd the “fully up” position is “on”.

 If the 

LED on the transmitter lights dimly, change the batteries. 

 
Take care no

t to incur “feedback” (howling or screeching sound through the speaker) by 

keeping the microphone a sensible distance from the speaker and pointing away from the 

speaker so that it doesn’t 

hear

 the speaker output. 

 
Turning the ECHO control (22) clockwise adds an echo function for singing or special effects.   

 
The BASS or TREBLE (19, 20) tone character can be cut by turning the relevant control anti-

clockwise or boosted by turning clockwise.  
 

When not in use, switch the wireless microphones off and remove batteries if not being used 
for long periods. 
 

External Inputs 
 

In addition to the included VHF microphone, a 6.3mm jack input (25) is provided to connect a 
wired microphone, which is governed by the wired mic input volume control (21).  

 
Another 6.3 jack is provided for a guitar input (13) which is governed by the guitar input 

volume control (12) 
 

Also, a 3.5mm stereo jack input (17) is provided for a line input source such as a CD player or 
smart phone.  

Summary of Contents for PAL12









Reviews: