PAL12 PAL15 User Manual
Internal media player
The PAL SERIES unit has an internal media player for
digital audio playback from USB/SD/MMC media, FM
tuner or via Bluetooth. The media player output is
governed by the MEDIA VOL control (15).
Controls are arranged in a row beneath the LED display (3)
Press
MODE
to select the function you require - USB, SD, FM radio or Bluetooth.
–
Use this mode for both USB and SD/MMC cards
FM Radio
–
(the last chosen frequency will appear
–
i.e. 89-107MHz)
–
Use this mode for
Bluetooth™
selection
Playback from USB Device or SD/MMC Card
Inserting a USB memory device into the USB connector or SD/MMC card into the SD/MMC card
slot will automatically load and begin playback of mp3/wma audio tracks stored on the media.
If playback does not start, press the Play/Pause button (
)
or remove the memory device
and check that the stored files are the correct compressed audio format before re-connecting.
PLAY/PAUSE (
)
will alternately play or pause the selected track.
PREVIOUS TRACK (
) will step backwards through tracks.
Holding the PREVIOUS TRACK button will reverse seek through the current track.
NEXT TRACK (
) will step forwards through tracks.
Holding the NEXT TRACK button will forward seek through the current track.
USB/SD
will toggle between USB or SD/MMC card media playback.
REPEAT
will select between repeating
track or
tracks on the storage device.
FM Tuner
In FM tuner mode, the station frequency (in MHz) will be displayed.
For initial setup, press PLAY/PAUSE to begin the auto-tuning process.
The tuner will seek through all frequencies for strong signal reception (i.e. radio stations)
These will be stored into memory as
,
,
,
… etc.
Stored stations can then be selected using the PREVIOUS or NEXT buttons
Note: Pressing PLAY/PAUSE during auto-tune will allow manual tuning via PREVIOUS/NEXT
