background image

 

www.avsl.com

                                                                                            154.030UK User Manual 

CH6 (cont

d) 

151-200 

Colour fade setting 

 

 

201-250 

Colour pulse setting 

 

 

251-255 

Open sound to light setting 

 

CH7 

0-255 

Speed from slow to fast 

Available in all modes 

 

 

Specifications: 

 

Power supply 

110-240Vac, 50/60Hz (IEC) 

Power consumption 

35W 

Fuse rating 

T1.0A 

LED quantity 

18 x 1.5W 3-in-1 

DMX channels 

Illuminance 

1700lux @ 2m 

Beam angle 

25° 

Projection distance 

10m (approx.) 

Dimensions  

200x200x78mm (without Bracket) 

Weight  

1.17kg 

 

Troubleshooting: 

 

No power (mains) 

Check mains voltage is correct, and outlet is switched on 
Check IEC lead and fuse (if fuse continually blows, refer to your dealer) 

No light output 

Check control panel mode settings 
Check DMX settings from controller (dimmer levels, blackout etc.) 

Unresponsive to DMX  

Check that unit is in DMX mode and ensure DMX address remains lit to 

confirm receiving DMX signal 
Check DMX controller is not set to black out 
Check DMX controller is on correct fixture/page 
Check master dimmer value 
Check correct DMX address is set 
Check DMX connection and leads 

Overheating/ 
cutting out 

Ensure adequate ventilation and unit is not too close to a heat source 

 

 
 

   

 

 

 

 

This product is classed as Electrical or Electronic equipment and should not be disposed  

with other household or commercial waste at the end of its useful life. 

The goods must be disposed of according to your local council guidelines. 

 

Errors and omissions excepted.

  

Copyright© 2021 AVSL Group Ltd, Unit 2 Bridgewater Park,                                                  AVSL (Europe) Ltd, Unit 3D North Point House, 
Taylor Road, Trafford Park, Manchester. M41 7JQ.      

 

       North Point Bus. Park, New Mallow Road, Cork, Ireland. 

Summary of Contents for PAR100

Page 1: ...1 x main unit with bracket and screws 1x remote control 1 x UK IEC mains lead and 1 x manual Warning To prevent risk of fire or electric shock do not expose the unit to rain or damp environments In the event of a spillage disconnect the mains and allow the unit to dry out naturally Qualified personnel should then check the unit before continuing use Please read through this manual thoroughly befor...

Page 2: ...r debris build ups Do not use strong solvents for cleaning the unit Rear panel controls 1 Manual control buttons 2 DMX Signal in 3 DMX signal out 4 LED display 5 IEC power in fused 6 IEC power out Manual control menu Press the MENU button to enter the settings menu Press UP and DOWN buttons to navigate through various setting functions Press ENTER button to save the desired setting Menu Number ran...

Page 3: ...R lead Extra fixtures can be controlled by the same DMX signal by looping through the DMX out on the unit To enter DMX mode select A001 from the menu and confirm the correct start address by using the UP and DOWN buttons and ENTER to confirm This unit has 7 DMX channels as indicated in the table below Channel Value Function Setting CH1 0 255 Master dimming 0 100 Available in all modes CH2 0 255 Re...

Page 4: ... controller dimmer levels blackout etc Unresponsive to DMX Check that unit is in DMX mode and ensure DMX address remains lit to confirm receiving DMX signal Check DMX controller is not set to black out Check DMX controller is on correct fixture page Check master dimmer value Check correct DMX address is set Check DMX connection and leads Overheating cutting out Ensure adequate ventilation and unit...

Reviews: