160.473UK User Manual
Specifications
Power supply
230Vac, 50Hz (IEC)
Fuse
F10A (5 x 20mm)
Heating element
2000W
Reheat time
8 to 10 mins (approx.)
Fog output (approx.)
40,000 Cu Ft (1133m³)/ min
Tank capacity
5l
Remote control
Wireless remote, wired timer remote, DMX512
Remote cable length
5m
RF Remote frequency
433MHz
DMX connection
3-pin XLR in/out (1-channel)
DMX channels
Single channel – 0=No output, 1-255=full output
Dimensions
670 x 350 x 260mm
Weight
10kg
Troubleshooting
Warning: Hot components! ... Switch off and allow to cool before touching the unit.
No light on mains
switch
Check mains voltage is correct and socket is switched on
Check IEC lead is OK and connected properly
Check mains fuse in IEC connector and fuse in plug top
If fuse blowing repeatedly, refer to qualified service personnel
Ready light stays off
Check remote is connected properly
If light is permanently off, refer to qualified service personnel
Ready light is on but
no fog output on
manual or
continuous
Check fog fluid level
If fluid is OK and pump working, the lines may be blocked
Check that nozzle is not blocked or obstructed
If blocked, clean with fog machine cleaner & distilled water
No fog output on
timer function
Ensure timer button is pressed in and timer LED is lit
Check interval, duration and output control settings – test manually if necessary
No response to DMX
Check that XLR leads are connected properly
Check that DMX signal is OK by testing on other equipment
Check that the DIP switch settings are set to the correct address
Ensure that the other remote controls are not overriding DMX
Disposal:
The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful
life. The goods must be disposed of according to your local council guidelines
Errors and omissions excepted.
Copyright© 2014. AVSL Group Ltd.
