160.566UK User Manual
SW-3LED
LED SNOW MACHINE 800W
Item ref: 160.566UK
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction:
Thank you for choosing the SW-3LED 800W LED snow effect machine for small to mid-sized venues and events. This unit
utilises a heavy-duty fan to convert snow fluid into a blizzard of foam particles, giving the impression of snowfall. The
snow can then be highlighted with an array of colours from the 6 bright LEDs housed in the front of the unit. Wired
remote control is included for snow on demand operation and the additional RF remote can be used for more precise
control of the LED effects.
In the box:
Your SW-3LED should reach you in good condition and should be supplied with IEC mains lead(s), wired and wireless
remote controls and a mounting bracket with thumbscrews. If there are any signs of damage or items missing from the
packaging, contact your dealer immediately.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event of a spillage,
disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then check the unit before
continuing use.
Please do not open cover, contains high voltage. This product is not
serviceable or repairable by the end user. Please refer to qualified
personnel for service and repair.
er or professional when unit malfunction.
